Hazardous Storage. Phoenix Systems Workplace Interiors

Storage Vaults

From £2,909.16 incl VAT

Adjustable vent meets the requirements of both Flammable Storage (vent closed) and Agrochemicals (vent open)
All welded units conforming to the A.P.E.A. Construction requirements
These vaults provide a half hour protection from collapse and the passage of fire
Multi-lockable for high security, and fitted with a lift up action lid assisted by gas struts
Middle shelves pivot on models SSV01Z and SSV02Z to enable larger items to be stored on the base level
Model SSV02Z: Clearance height between the bottom and top shelf is 363mm. Clearance height
between top shelf and lid is 255mm
Model SSV03Z has a central partition and four shelves - the two middle shelves fold away and the two top shelves are made in 3 sections, the back section is fixed in position and the front two sections removable
All models have a liquid-tight base to contain spillage
Please not: A Fork Lift will be needed to unload all these vaults

£10,392.96 incl VAT

£10,710.24 incl VAT

Call for pricing

20 year structural guarantee
Base is manufactured from 3mm mild steel with RHS cross members & pressed ribs
Corner posts, shelf frames & main rails are rolled hollow section
The roof is pressed with suitable bracing & fully welded around the perimeter, while the back,
side & door panels are pressed from 2mm mild steel sheet & corrugated where required
Fitted with crane lifting points (maximum 2000kg per lift point) & sliding doors
The floor area above the sump is covered with galvanised steel channel sections so that
loose drums or pallets can be stored directly onto it, whilst the upper shelf is an open box section
which is designed to support pallets. Grid mesh shelving is available - please call for details
Shot blasted before being painted (RAL 6029) for greater durability
Other colours are available - please call for details
EDRIB9624 - push back system above the sump, allowing the units to be pushed to the back of the units

Call for pricing

FM & TUV/GS Approved
For cleaning parts & sub-assemblies where the volume of work does not warrant a larger rinse tank
Dip tank covers stay open for convenient access; self-closing mechanism & fusible link metals at 74°C to snap the cover shut in case of fire

Call for pricing

FM & TUV/GS Approved
Easy means of cleaning small parts in solvents
Simply place work on spring loaded, perforated dasher plate, press down, agitate, then release to return dasher to drain position
Plated steel dasher also works as an effective flame arrester to reduce the risk of fire flashback
Hinged cover minimizes evaporation losses & protected rim reduces the possibility of hand injury

Call for pricing

FM & TUV/GS Approved
High density polyethylene disposal cans provide superior chemical resistance & leak protection
Spring loaded sealed cap, normally closed, automatically vents between 3 & 5 psig (0.2 & 0.35 bar)
Stainless steel handle & hardware with latch-catch system hold the cap in the open position for easy filling & pouring
Large mouth opening features a built-in stainless steel flame arrester to guard against outside ignition
Current carrying, patented carbon insert embedded in the container allows for proper grounding
Broad base design provides stability & resists accidental tip over

Call for pricing